Note: This directory has the latest revision of the C API for XDIO.
XDIO is on the DIO2 header, documented on page 35 (also see pp.36-38 for XDIO)
TS-7260 User's Manual
XDIO is on the DIO2 header, documented on page 33 (also see pp.35-38 for XDIO)
1. Revision 1.0.1, released 7-18-6, updated the XDIO API to reflect the
fact that the value read from the data register will show the actual
voltage sensed at the pin, even though the pin might be an output
programmed to a different level. (This happens, for example, if you set
the output high but have too much load on the output, in which case you
might read the pin back as a logic low.)
2. There are only 12 bits of resolution available for generating pulses.
Thus for example the longest pulse you can generate is on the order of
1/8th of a second. The XDIO code does not detect if you've asked for a
larger value than will fit into the PWM registers.